
<11006749 001>
Page 43 of 50
National Deviation
Clause Requirement – Test Result - Remark Verdict
Australia National Differences according to CB Bulletin No. 107A, May 2004
15.1.1 After the second paragraph, add the following:
Plugs for the connection of apparatus to mains-
powered socket-outlets shall comply with AS/NZS
3112 or AS/NZS 3123. Apparatus with a plug
portion, suitable for insertion into a 10A 3 pin flat-
pin flat-pin socket-outlet complying with AS/NZS
3112, shall comply with the requirements of
AS/NZS 3112 for equipment with integral pins for
insertion into socket-outlets.
Added.
P
15.3.5 In Table 15, in the second and third rows of the first
column replace “6” with “7.5”.
Replaced.
P
16.2 In Table 18, in the second and third rows of the first
column replace “6” with “7.5”.
Replaced.
P
16.3 After item (b)
add
the following:
A flexible cord complying with AS/NZS 3191 need
not undergo this test.
Added.
P
20 Add the following after NOTE 2:
For alternative test refer to Clause 20.201.
Added.
P
20.1.4 In Table 21, in the third and fourth columns
change
both “HB75” and “No requirement” to “V-1”.
Ditto.
P
Comentários a estes Manuais