Acer Altos easyStore M2 Manual do Utilizador descarregar pdf (Página 192)

4 Managing the storage system

170

4 Click Apply.

5 When the confirmation message displays, click OK.

Note: If you changed the IP address of the storage system, you

must now access the IPStor Express Manager using the new IP

address.

The packet size for

transferring data

Specify whether or not to transfer larger data

packets between the storage system and the

computers in your network by selecting or

clearing the Jumbo Frames check box.

If you clear this option, the storage system will

use 1514-byte packets.

If you select this option, you can specify a larger

packet size (from 1514 to 9014 bytes).

Note: Using jumbo frames allows you to transfer

data more quickly. However, you can select this

option only if your network, Ethernet switch, and

the network interface cards (NICs) on the

computers in your network support the specified

packet size. To determine whether you can use

jumbo frames, refer to the documentation for

those components.

The FTP settings If you want to use the storage system as an FTP

server, select the Enable FTP server check box.

If you do not want to use the storage system as

an FTP server, clear this option.

For information about accessing the storage

system using FTP, refer to “Accessing shared

folders” on page 183.

The UPnP settings If you want to enable the UPnP discovery

protocol support, select the Enable UPnP service

check box.

If you want to disable the UPnP discovery

protocol support, clear this option.

To change this Do this

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 297 298

Sem comentários

Acer Altos easyStore M2 Manual do Utilizador Página 192