Acer AB460 F1 Manual do Utilizador descarregar pdf (Página 221)

100

101

201

AB460 F1 Onboard SAS RAID Configuration

This section briefly shows how to create RAID with onboard SAS RAID.

Entering onboard SAS Configuration Utility

To start the SAS Configuration Utility, press CTRL-M when you see the

onboard SAS BIOS during POST. After POST finished, the SAS

Configuration Utility will show on the screen.

Loading Factory Default Setting

1 In LSI Corp Config Utility, select LSI SAS2008 and press Enter.

2 In Adapter Properties screen, move cursor to Advanced Adapter

Properties and press Enter.

3 Move the cursor to Restore Defaults.

4 Press ESC to exit the menu.

5 Press ESC and then select Save changes then exit this menu.

6 Select Exit the Configuration Utility and Reboot to quit the utility.

Creating a RAID Volume

1 In LSI Corp Config Utility, select LSI SAS2008 and press Enter.

2 In Adapter Properties screen, move cursor to RAID Properties and

press Enter.

3 In Select New Volume Type screen, please select the RAID level you

want to create. For this example, we create RAID 1 by selecting

Create RAID 1 Volume.

4 In Create New Volume screen, move the cursor to RAID Disk

column and then select the HDD desired by pressing + key or Space

key.

5 The below warning message displayed. Please press + key or Space

key to add the HDD to the RAID volume.

WARNING! Data was found on the selected disk, this data will be lost when

the volume is created!

6 Return to Create New Volume screen.

7 Move the cursor to RAID Disk column and then select another HDD

desired for the RAID volume.

8 Press + or Space key to add the HDD.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 617 618

Comentários a estes Manuais

Sem comentários

Acer AB460 F1 Manual do Utilizador Página 221

Comentários a estes Manuais