4 Networking Switch Modules
302
IP Extended ACL
Clicking the IP EXTENDED ACL tab brings up the IP EXTENDED ACL
C
ONFIGURATION page, which displays the various parameters required to
configure the Extended IP access lists. The parameters for this page are
shown in the following table.
Figure 4-189. IP Extended ACL Configuration
Parameter Description
ACL Number This parameter specifies the unique ID for the access
list. This value must be in the range from
1001
to
65535
.
Action This parameter specifies whether the packets must be
allowed or dropped when a match has been found.
Source and
Destination IP
Address
This parameter specifies the IP Address for which the
access list must be applied.
Subnet Mask This parameter specifies the Address Mask
corresponding to the IP Address.
Comentários a estes Manuais