Acer ARMC Manual do Utilizador descarregar pdf (Página 145)

Appendix F : Serial Over LAN

135

Hardware Setup, Continued

BIOS

After you have established a physical connection from your host system’s serial port to

you ARMC card, you must enable Remote Access in your AMIBIOS.

Step Description

1 From the host system’s terminal, enter the AMIBIOS setup.

2 Confirm that your Onboard Serial Port you are using is enabled.

3Enter the Remote Access Configurations menu.

4 Set the Remote Access setting to [Serial].

5 Set the Serial Port Number to [COM1] or [COM2] depending on the serial

(COM) port you are using.

6 Set the Serial Port Mode baud rate you desire. By default, it is set to [19200

8,n,1].

7 If available, you can set the Post-Boot Support option. When enabled, the ARMC

attempts to output the DOS screens or the initial windows text screens. This is

really handy when you want to see the OS Boot Menu.

8 Save and Exit the BIOS.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 172 173

Sem comentários

Acer ARMC Manual do Utilizador Página 145