Acer PD726 Especificações descarregar pdf (Página 51)

... English

Appendices

Replacing the lamp

The projector will detect the lamp life itself. It will show you a

warning message “Lamp is approaching the end of its useful

life in full power operation. Replacement Suggested!” When

youseethismessage,changingthelampassoonaspossible.

Makesuretheprojectorhasbeencooleddownforatleast30

minutes before changing the lamp.

Warning:

Lamp

compartment is hot!

Allow it to cool down

before changing lamp!

Warning:

reduce the risk of

personalinjury,donot

drop the lamp module

or touch the lamp bulb.

The bulb may shatter

and cause injury if it is

dropped.

Lamp Changing Procedure:

1. TurnthepowerofftheprojectorbypressingthePowerbutton.

2. Allowtheprojectortocooldownatleast30minutes.

3. Disconnect the power cord.

4. Removethecover.



5. Push up and remove the cover.



6. Removethe3screwsfromthelampmodule.



7.Pulloutthelampmodule.



To replace the lamp module, reverse the previous steps.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Sem comentários

Acer PD726 Especificações Página 51