Acer AIR-204 Guia do Utilizador descarregar pdf (Página 48)

English

To Change the Lamp

1 Turn off the projector by pressing the power button.

2 Allow the projector at least 30 mins to cool down.

3 Disconnect the power cord.

4 Open the screw cover on the right side of the projector. (Illustration #1)

5 Use a screwdriver to loosen the screw on the right side of the projector.

(Illustration #2)

6 Push and slide the top cover (Illustration #3) and then open the top cover.

(Illustration #4)

7 Loosen two screws on the lamp module (Illustration #5) and pull up the

lamp bar. (Illustration #6)

8 Pull out the lamp module by force. (Illustration #7)

To replace the lamp module, reverse the previous step.

Warning: To reduce the risk of personal injury, do not drop the

lamp module or touch the lamp bulb. The bulb may shatter and

cause injury if it is dropped.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 61 62

Sem comentários

Acer AIR-204 Guia do Utilizador Página 48