Acer Altos R700 Series Manual do Utilizador descarregar pdf (Página 87)

• Discovers the product configuration based on instructions in a

master configuration file

• Displays the FRU information

• Updates the EEPROM associated with the Baseboard Management

Controller (BMC) that holds the SDR and FRU area

• Generically handles FRU devices that might not be associated with

the BMC

What You Need to Do

Either run the utility directly from the Resource CD or from diskettes

created from the CD.

If you run the FRU/SDR Load Utility from a diskette, copy the utility

from the CD. Follow the instructions in the included README.TXT file.

If the diskette drive is disabled, or improperly configured, use BIOS

Setup to enable it. If necessary, disable the drive after you are done

with the FRU/SDR Load Utility.

How You Use the FRU/SDR Load Utility

The utility:

• Is compatible with ROM-DOS Ver. 6.22, MS-DOS Ver. 6.22 (and later

versions), Windows 95 DOS, and Windows 98 DOS

• Accepts CFG, SDR, and FRU load files (the executable file for the

utility is FRU/SDR.exe)

• Requires the following supporting files:

• One or more .fru files describing the system’s field replaceable

units

• A .cfg file describing the system configuration

• An .sdr file describing the sensors in the system

Command Line Format

If you are not performing an automated update using a Software

Update Package (SUP), the basic command line format is:

FRU/SDR [-?] [-h] [-d {fru, sdr}] [-cfg filename.cfg] [-fru

filename.fru]

BS811.f/cppl!!Qbhf!88!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 134 135

Sem comentários

Acer Altos R700 Series Manual do Utilizador Página 87